Categories
Manufacturers

KAWASAKI KMX200 KIPS VALVE KITS

KAWASAKI KMX200 KIPS VALVE KITS
KAWASAKI KMX200 KIPS VALVE KITS KAWASAKI KMX200 KIPS VALVE KITS
£80.00 
SKU: KMX200KVS 
Availability: In Stock
Qty:  
Add To Compare | Add Product To Your Wishlist

2 valves, 2 bushes and 2 seals

NEW KMX200 KIPS VALVE KITS 

Complete kit for one bike including 2 valves, bushes and seals


Please note that if you would like to buy only one KIPS valve, bush or similar please use our separate listings. 

We have made these parts in response to high demand for the part and now hold good stock of these parts off the shelf.  

Please note: Both valves are identical - the original Kawasaki parts had the punch mark indicating the valve position in different places dependent on whether they were 'left' or 'right' valves.

To assist on assembly ours go in with one valve one tooth out from the marking as shown in the description photo.

As you will see in the photo we have shown the valves with the bushes out so that you can see the punch marks, but the valves will not operate properly without the bushes in.  The parts are made from steel as per the later versions and should be cleaned regularly to prevent jamming and damage (this was always the case - and what led to them being broken in the first place).

 When the control rod is fully in (low speed and off position) you should see the left valve open to the KIPS bottle and the right valve although it may appear open from the exhaust end will be closed at the cylinder end.  If you would like to check this before reassembling the head then this can easily be checked by holding a bright light in the barrel with the piston at BDC.

There are no reviews for this product.


WRITE REVIEWS

Please click here to login to your account to write review.

clear-bug-div
Tell a Friend
 
Tell someone you know about this product.