Reed block stuffer/air guide for V-force reed blocks
This is the reed block stuffer/air guide for V-force reed blocks which is needed to convert them for inline carb configuration as opposed to canted which they are for the motocross bikes. Two variants are available; one for use with standard 28mm carbs (including bored-out to 30mm carbs) and the other for the conversion to 34 or 35mm carbs.
Without this part the benefit of larger carbs and V-force reed blocks will be largely negated. This part is shown in the images either as an orange or black item, currently the same (34mm) image is used for both but they are significantly different. The reed block itself is not included in this item.
A significant part of the high performance conversion to the KR1-S.
Currently the only V-force reed blocks available are for angled carbs and these air guides convert them for use with inline carbs.
Supplied individually so two are needed for KR1-S
If you intend to run standard reed blocks then please see our separate listing for those modified stuffers.
We generally make these to order so if they are showing 'out of stock' we will normally send them out one to two working days later.